The following table defines parameters for the ip vrf command and the router vrf command.
Variable | Value |
---|---|
WORD<1-16> | Specifies the name of the VRF. |
The following table defines parameters for the interface loopback command.
Variable | Value |
---|---|
<1-256> | Specifies the ID of the loopback interface. |
The following table defines parameters for the ipv6 interface command.
Variable | Value |
---|---|
address WORD<0-255> |
Specifies the IPv6 lookpack interface address. Enter the interface address in the WORD<0-255> portion. |
vrf WORD<1-16> | Specifies the name of the VRF. Enter the VRF name in the WORD<1-16> portion. |
The following table defines parameters for the ipv6 ospf command.
Variable | Value |
---|---|
<1-256> |
Specifies the interface ID value. |
area {A.B.C.D} |
Specifies the IPv6 OSPFv3 area address, typically formatted as an IP address. Enter the IP address in the {A.B.C.D} portion. |